Paradigm® Reference
Click image to enlargeMillenia™ 20 Hybrid
5-driver, 2-1/2-way acoustic suspension, hybrid in-wall, pre-attached GRIP™ bracket
Amazing Shrinking Flat-Panels Meet Their Match! Once upon a time, flat-panel TVs mounted to the wall were five to six inches deep. Today’s new ultra-slim LCD and Plasma displays can protrude as little as an inch and a half from the wall! These slim designs can be dwarfed by conventional on-wall speaker designs. Enter the Millenia Hybrids with their gorgeous ultra-thin profile. Thanks to their half-in/half-out-of-the-wall design they fit perfectly with the look of the thinnest flat-panels. With the grille on, they are already thinner than today’s thinnest flat-panel televisions! In fact, they are so thin, they’re equipped to take on those even-thinner flat panels yet to come. And to top it all off, installation is easy as 1, 2, 3. State-of-the-Art S-PAL™ Satin-Anodized Pure-Aluminum Domes. Ferro-fluid damped and cooled. Domes have been deep anodized for extreme rigidity. Low-mass treated textile suspensions. Highs are spacious, clear, silky smooth and extended. State-of-the-Art MLP™ Mica-Loaded Polymer Cones. High-stiffness-to-mass ratio of polypropylene and the exceptional damping quality of the mica ensure accurate, lifelike and critically revealing performance. A true state-of-the-art design. State-of-the-Art Precision-Engineered Mineral-Filled Co-Polymer Polypropylene Bass Cones. Highly damped and tremendously rigid, they provide tight, well-defined low-frequency response, ideal for music and movies. Unique Profile – Unique Design Requirements. Ultra-thin 1-1/2-inch (38.6 mm) side profile. Engineered to incorporate the predictable effect of the wall on the speaker's frequency response. Pre-attached GRIP™ bracket design optimized to exploit maximum wall area for vibration-free performance, even at maximum output. * DIN 45 500. Indicates -3 dB in a typical listening room. † With typical program source, provided the amplifier clips ** Depth required is the distance between 1/2˝ drywall, or similar material.Overview

Specifications
SPECIFICATIONS
Design
5-driver, 2-1/2-way acoustic suspension,
hybrid in-wall, pre-attached GRIP™ bracket
Crossovers
2nd-order electro-acoustic at 2.2 kHz;
2nd-order electro-acoustic at 600 Hz
(bass drivers)
High-Frequency Driver
25-mm (1 in) S-PAL™ dome,
die-cast heatsink chassis
Bass / Midrange Drivers
Two 115-mm (4-1/2 in) MLP™ cones,
25-mm (1 in) dual-layer voice-coils,
HTD™ system die-cast chassis
Bass Drivers
Two 115-mm (4-1/2 in) mineral-filled
polypropylene cones, two 25-mm
(1 in) dual-layer voice-coils,
HTD™ system die-cast chassis
Low-Frequency Extension*
75 Hz (DIN)
Frequency Response:
On-Axis
30° Off-Axis
±2 dB from 110 Hz - 22 kHz
±2 dB from 110 Hz - 18 kHz
Sensitivity - Room / Anechoic
93 dB / 89 dB
Suitable Amplifier Power Range
15 - 150 watts
Maximum Input Power†
110 watts
Impedance
Compatible with 8 ohms
External Dimensions:
(H x W x D)65.5 cm x 17.5 cm x 11.6 cm
25-13/16 in x 6-14/16 in x 4-9/16 in
Minimum Mounting Depth**
2˝ x 4˝ construction with 1/2˝ drywall
Cutout Dimensions:
(D or H x W)59.7 cm x 13.0 cm
23-1/2 in x 5-2/16 in
Minimum Internal Volume Required
4.4 L / 0.15 cu ft
Weight (unpacked)
5.9 kg / 13 lb each
Finish
Black Gloss
no more than 10% of the time.




Millenia™ 20
Millenia™ 20 Hybrid
Millenia™ ADP
Seismic™ 10
Seismic™ 110
Millenia™ 10 Hybrid
Millenia™ 20 Trio
Millenia™ 30

